mean time to failure
英 [miːn taɪm tu ˈfeɪljə(r)]
美 [miːn taɪm tu ˈfeɪljər]
平均无故障时间
双语例句
- The goal of any good systems administrator is to avoid being a victim of the mean time between failure value of hardware and find a way to mitigate the risk of a disk failure.
所有好的系统管理员的目标是避免成为硬件平均故障间隔时间的受害者，并找到一种方式来减轻磁盘故障的风险。 - This provides an availability figure based on mean time to failure information in days, and mean time to recover information in hours.
它提供了一个基于数天内的平均失效时间信息和数小时内的失效恢复信息的可用性特性。 - If you have mean time to failure and mean time to recovery information, enter that and the spreadsheet will calculate the availability for you in the "Calculated availability contributions" lines.
如果有平均失效到达时间和平均恢复时间信息，输入到表格中将计算出“计算出的可用性贡献”行。 - Mean time to failure is the average continuously operational period& i.e.the average period between the end of one failure and the beginning of the next.
平均失效到达时间是连续运行期间的平均值&也就是说，在结束一个失效和开始另外一个之间的平均周期。 - Mean time to failure
故障停用平均间隔时间 - NTTF mean time to failure;
平均可工作之时间； - The reliability evaluation indices of bus arrangement systems are availability, unavailability, failure frequency, mean time between failure, mean time to repair, failure rate and repair rate.
文中计算的电气主接线系统的可靠性指标是：可用度，不可用度，故障频率，平均相邻故障间隔时间，平均修理时间，故障率，修复率。 - Using vector Markov process theory and Laplace transform method, we obtain the Laplace transform of the reliability, the mean time to first failure, the steady-state availability and the steady-state failure frequency and so on.
利用向量Markov过程理论和Laplace变换的方法，求出了系统可靠度的Laplace变换，系统首次故障前平均时间的表达式，系统的稳态可用度和稳态故障频度等可靠性指标； - With the comparison of the result calculated by the maximum entropy method and the MTTF ( mean time to failure) method respectively, the maximum entropy method was proved to be more precise.
通过最大熵方法和故障平均间隔（MTTF，MeanTimeToFailure）方法的结果比较，证明最大熵方法更具准确性。 - According to the reliability theory about the mean time to failure and the system reliability evaluation, the reliability of the high capacity storage battery arrays with different connection schemes was evaluated.
依据可靠性理论中系统平均无故障时间及系统可靠度评估的相关内容，对大容量蓄电池组的不同组合方式进行了可靠性评估。 - Using the property of Markov at the points of replacement period, a model of determining the optimal period is developed with objective of maximizing the mean time to first failure of system.
利用在更换周期点上具有的马尔可夫性质，以系统首次故障前平均工作时间最大为目标建立了确定最佳更换周期的模型。 - The Lower Confidence Limit of Mean Time to Failure for Two Parameter Weibull Distribution
两参数Weibull分布平均寿命的置信下限 - Additionally, the index Mean Time To Jth Failure ( MTTJF) is given as the extension of Mean Time To First Failure ( MTTFF).
本文还提出了第J次故障前平均运行时间MTTJF这个可靠性指标，作为对首次故障前平均运行时间MTTFF的推广。 - Reliability and Mean Time to Failure Analysis of Fuzzy Random Unrepairable Systems
模糊随机不可修系统的可靠度和平均寿命分析 - In addition, the U-shaped interface, which minimizes electron crowding and localized heating effects, increases the mean time to failure by electromigration. Consistent, repeatable blanket film property and good parametric electrical test results have proven the production worthiness of this process.
此外，使电子阻塞和局部加热效应最小化的U型界面，提高了电子迁移失效的平均时间，一致的、可重复的覆盖膜特性和良好的电参量测试结果已经证实了这种工艺的生产价值。 - As compared with the traditional network survivability schemes, our scheme improves the efficiency of the network resources and decreases the mean time to failure. Our method solves the contradiction between the network survivability and the efficiency of the network resources.
与传统的网络可生存方案相比，此方案既提高了网络资源的利用率，又降低了故障恢复时间，较好的解决了网络的可生存性与资源利用率的矛盾。 - The individual parameters for evaluating overhauled motor vehicles are: mean time to first failure ( MTTFF), mean time between failures ( MTBF), equivalent failure rate and unit repairing cost, etc.
大修汽车可靠性单项指标的确定：平均首次故障里程、平均故障间隔里程、当量故障率、单位维修费用； - With this method, the paper evaluates the rate of failure λ, mean time to failure θ and reliability function R ( t) of the electronic parts.
运用这种方法对电子器件的失效率，λ平均无故障工作时间θ和可靠度R（t）进行了点估计和区间估计。 - In the mean time, monopoly leads to failure of market. So, it become one of the reasons which causes government regulate economy.
垄断将导致市场失灵，从而成为政府采取规制手段干预经济的原因。 - An Evaluation Method about the Mean Time to Failure of Electrical Products
一种关于电工产品平均寿命的评估方法 - Multi-factors defined in CC are replaced by MTSF ( mean time to security failure) as the metric of vulnerability complexity.
把CC评估标准定义的多个变量映射为以平均安全时间为参数的度量指标。 - Reliability indicator includes Mean Time To First Failure ( MTTFF) and Mean Time Between Failure ( MTBF);
可靠性指标包括平均首次故障里程MTTFF和平均故障间隔里程MTBF； - The reliability lab ship fuel oil donkey boiler controlled by relay control system is evaluated using counting method, and mean time to failure ( MTTF) of the control circuit is educed.
对采用继电器控制系统进行控制的某实验室船舶燃油辅助锅炉，采用计数法进行可靠性评估，得出控制电路的平均无故障时间。 - By concentrating on Mean Time to Repair ( MTTR) rather then Mean Time to Failure ( MTTF), we find that quick recovery reduces recovery time and thus offers higher availability.
通过关注平均修复时间，而不是平均故障时间，发现快速的恢复减少了恢复时间，因而提供了更高的可用性。 - The proposed method that discussed in details can be used in dependent failure analysis, reliability analysis and analysis of the mean time to failure of exponential distributed units.
可用于寿命服从指数分布产品的相关失效分析、可靠度分析和平均寿命分析，不需要采用耗费机时的蒙特卡罗数字仿真方法。 - Simulation results confirm that the average access delay of FDPA is reduced, and the mean time to failure is increased, comparing to the random placement strategy and the CRUSH method.
实验结果表明，与典型的随机放置算法和CRUSH相比，FDPA的平均访问时间更低，平均无故障时间更长。 - Using Markov process theory and the Laplace transformation method, we obtain the explicit expressions of the reliability and the mean time to first failure of the system.
应用Markov过程理论和Laplace反演变换的方法，求出了系统可靠度和首次故障前平均时间的直接表达式。 - Then the performance measures of the systerm are analyzed respectively on the point of queueing theory and reliability, then the mean queue length, the availability, the mean time to first failure of the systerm and the reliability of laplace transform are derived.
然后分别从排队论角度和可靠性角度分析了系统的性能，得到了平均队长、可用度、首次故障前平均时间、可靠度的拉普拉斯变换等指标。